Vq30det wiring question

[MrDavid]

Hey guys.

I was just wondering where the wiring is for the triggers?

There is a little black thing with wires coming out of the front and i was wondering if thats where the cam angles sensor wiring comes from?

its on the passenger side of the motor.

Cheers,
David

[T04GTR]

there is 3, one on the timing cover passenger side 2/3 of the way up, one near the crank pulley, and one near the flywheel on the sump passenger side .

the pain is, the cam sensor/trigger has 3 pulses per cam revolution, same with the crank pully one, and the flywheel has the usual 360.

[MrDavid]

ok cheers, because i am wondering how to wire in a link g4, i think it only needs one trigger imput, ie cam angle sensor and want to know how id wire it in.

[T04GTR]

IM pretty sure the g4 can read the odd triggers from the vq30. sm4 autronic, the new adaptronic, and the g4 do the weird cam/cran trigger's

[MrDavid]

cheers t04gtr

would you be able to take a pic or two showing me where they are?

thanks heaps

[vq200sx]

Hi man
Take it you are all sorted with this, I have been out of the loop a little.
If you run a link, you only really need the front two sensors ie the crank and cam, forget about the flywheel.
I can get you photos if you haven't sorted it.
Cheers

[MrDavid]

hey vq200sx some pics would be wicked, annoyingly my loom is cut so ill probably be asking a lot of questions with wiring the link